MB Ready Wall

System components

1.	MB Euro Systempipe 12 or 17
2.	MB Steel Clipsrail 12 or 17 (ca 2.0 m/m²)
3.	Standard screws (5.0 x 50 mm)
4.	Floor plaster to be Knauf “Perlfix” or equal approved (a 10 kg bag covers approx 6 m² of MB Ready Wall depending on make)
5.	Dry wall screws (3.5 x 25 mm)
6.	Dry-assembly boards: dimension 0.60 m x 2.00 m x 0.125 m (brand: Rigips similar approved)

Applications

Suitable for use in new and existing residential buildings.

(Download Ready Wall)

MB Ready Floor S

System components

1.	MB Euro Systempipe 12
2.	MB Baseplate
3.	MB Steel Tiles
4.	MB Contact Adhesive
5.	Additional layer of insulation (if necessary); rigid, solid insulation board, not more than 40 mm thick
6.	Equalizing layer (if necessary)
7.	Edge insulation band (10 mm minimum thickness)
8.	Surface floorcovering with PCI-Collastic® for steel equal approved
9.	Wall plaster
10.	Rough brickwork

Applications

The MB Ready Floor S system has been specially developed for buildings where an thin and lightweight system is required. It can heat up and cool down very quickly.

(Download MB Ready Floor S)

MB Ready Floor TE

System components

A.	MB Euro Systempipe 12
B.	MB Baseplates
C.	Fermacell screed element 2 E 22 or equivalent with Fermacell screed glue, 40 to 50 g/m²
D.	Additional rigid and solid insulation board (in accordance with EnEV standard)
E.	Equalizing layer (if necessary)
F.	Edge insulation band (10 mm minimum thickness)
G.	Surface floorcovering
H.	Wall plaster
I.	Rough brickwork

Applications

The MB Ready Floor TE system has been specially developed for buildings where a thin and lightweight system is required. It is ideal for use in the refurbishment of existing houses, commercial buildings and in other installations where a thin system is required.

(Download MB Ready Floor TE)

Previous ← → Next